Repository logo
 

Flaw sensitivity in rate-sensitive high strength alloys: an assessment and future research directions

Accepted version
Peer-reviewed

Type

Article

Change log

Authors

Fleck, NA 
Deshpande, VS 
Suman Guha 

Abstract

The tensile strength of metallic alloys may be sensitive to the presence of short cracks, particularly in the embrittled state (such as phosphorous or sulphur segregation to the grain boundaries in a high strength steel). Experimental evidence reveals that cleavage accompanied by plasticity can occur when the net section stress is on the order of the yield strength. If the solid were mildly strain hardening but rate-insensitive, then no cleavage would be predicted as the crack tip tensile stress would not attain the local cleavage value. In the present study, the role of rate sensitivity is assessed by placing a tensile cohesive zone at the tip of an edge crack within a visco-plastic solid, and the crack is subjected to remote tension. Thereby, crack initiation and growth is predicted from short flaws in the presence of bulk plasticity. The crack growth resistance curve for long flaws is also determined. Implications of the predictions are discussed for hydrogen embrittlement, and the significance of rate effects in elevating the stress level adjacent to the crack tip is quantified.

Description

Keywords

Cleavage, Short crack, Rate sensitivity, Transition flaw size

Journal Title

Extreme Mechanics Letters

Conference Name

Journal ISSN

2352-4316
2352-4316

Volume Title

Publisher

Elsevier
Sponsorship
European Commission Horizon 2020 (H2020) ERC (206409)
The authors would like to acknowledge the funding and technical support from BP (ICAM02ex) through the BP International Centre for Advanced Materials (BP-ICAM) which made this research possible. The authors are also grateful for funding in the form of an ERC advanced grant 669764, MULTILAT, and to the US Office of Naval Research N62909-14-1-N232, project managers Dr. David Shifler and Judah Goldwasser.