Induced Birefringence in 3D Printing: Concealing Information Optically within Printed Objects
Published version
Peer-reviewed
Repository URI
Repository DOI
Change log
Authors
Abstract
jats:titleAbstract</jats:title>jats:pThis paper presents a novel method to spatially vary the intra‐layer birefringence of Fused Filament Fabricated (FFF) parts by controlling chain alignment during extrusion along individual rasters. The role of print speed, extrusion factor and layer separation on the birefringence of single PLLA layers is explored, at thicknesses ranging from 50–125 µm and print speeds 1000–6000 mm minjats:sup−1</jats:sup>. The cumulative and subtractive effect of multiple PLLA layers are explored to elicit colours corresponding to a range of retardations, achieve complete extinction, and printing a physical Michel‐Levy chart. By increasing print speed and reducing layer separation and extrusion factor, a birefringence up to Δjats:italicn</jats:italic> = 9 × 10jats:sup−4</jats:sup> could be achieved in single layers. In multi‐layer structures, retardations of 0–800 nm are demonstrated. These results suggest that spatially varied birefringence can be used to store data, text or images, which can be resolved when parts are illuminated between polarizers. This effect is utilized to present a steganographic technique embedding information within bulk printed parts. These techniques might find application in a range of printed optics and devices, where spatial control over molecular alignment and associated influence on the propagation of light is desirable, including the ability to encode information within a print.</jats:p>
Description
Keywords
Journal Title
Conference Name
Journal ISSN
2365-709X
Volume Title
Publisher
Publisher DOI
Sponsorship
EPSRC (1942009)
Engineering and Physical Sciences Research Council (EP/N027000/1)