A summary of the research data supporting "Modeling the charging process of a coil by an HTS dynamo-type flux pump"

"Figure 3 - Dynamo I-V Curves.xlsx": This Excel file contains all of the data related to Figure 3, "I-V curves of the modeled HTS dynamo calculated by the MEMEP and SEG-H methods for three frequencies of 4.25, 25 and 50 Hz and for airgaps of (a) 3.7 mm, (b) 2 mm, (c) 1 mm."

"Figures 4-7 - Dynamic Charging, Voltages, Power, Current-Voltage Distributions.xlsx": This Excel file contains all of the data related to Figures 4-7.

"Figure 8 - Coil Charging Current Curves.xlsx": This Excel file contains all of the data related to Figure 8, "The calculated charging current curves of the coil, comparing the results from the analytical equation (18) and the MEMEP and SEG-H methods, for three frequencies of 4.25, 25 and 50 Hz for airgaps of (a) 3.7 mm, (b) 2 mm, (c) 1 mm."

The data, except for those calculated using the analytical equation (see Figure 8), were obtained from two numerical models: the MEMEP method programmed in C++ and the segregated H-formulation (SEG-H) built in COMSOL Multiphysics 5.4 - see the main manuscript for more details.