Repository logo
 

The aerodynamics of Formula One car cooling ducts.


No Thumbnail Available

Type

Thesis

Change log

Authors

Fuller, Amanda Jane 

Abstract

Formula One teams expend a large amount of effort optimising the aerodynamics of the exterior of the cars. However, there is comparatively little understanding of the mechanisms governing the flow through the sidepod ducts. These contain the heat exchang,ers for cooling the engine and gearbox. The aim of this thesis is to investigate features of the flow through the sidepod ducts, to provide a base of understanding from which further optimisation can be undertaken. When designing the sidepod ducts and the heat exchangers, the aim is to provide the required cooling rate, whilst minimising weight, centre of gravity and incurring the smallest possible aerodynamic penalty. An idealised lD model of the flow through a sidepod is presented and used to assess which geometric features have the largest effect on duct performance. A numerical investigation of the effect of a non-uniform flow distribution through a heat exchanger is also undertaken. Experiments are conducted to quantify the loss of stagnation pressure associated with inclining a radiator within a duct. Inclination loss is divided into incidence lo~s and loss due to the duct shaping immediately downstream of the radiator. An actuator-disc type model of the radiator performance is added to one of the in-house CFD codes. This modified code is used to carry out further investigation into the effects of shaping the downstream duct. A study of the use of metal or graphite foams in a Formula One heat exchanger is performed. It is shown that a foam radiator could only deliver comparable performance to the current louvered fin radiator if it had a much larger volume. It is recommended that no further investigative work is conducted into the use of such foam heat exchangers. The components of this investigation are drawn together to provide some design recommendations for the future optimisation of sidepod ducts. These include the shaping of the inlet duct in order to reduce incidence losses and the shaping of the downstream duct immediately adjacent to the heat exchangers in order to minimise any detrimental flow interactions.

Description

This thesis is not available on this repository until the author agrees to make it public. If you are the author of this thesis and would like to make your work openly available, please contact us: thesis@repository.cam.ac.uk.


Cambridge University Library can make a copy of this work available only for the purposes of private study and non-commercial research. Copies should not be shared or saved in any shared facilities. Copyright over the content of these works is with their authors. Theses from the Library collection are considered unpublished works and according to UK legislation quoting from them is not allowed without permission from their author.

If you can commit to these terms, please complete the request form which you can find through this link: https://imagingservices.lib.cam.ac.uk/


Please note that print copies of theses may be available for consultation in the Cambridge University Library's Manuscript reading room. Admission details are at http://www.lib.cam.ac.uk/collections/departments/manuscripts-university-archives

Date

Advisors

Keywords

Qualification

Doctor of Philosophy (PhD)

Awarding Institution

University of Cambridge