Show simple item record

dc.contributor.authorBell, Tamsinen
dc.contributor.authorGonzález-Carballo, JMen
dc.contributor.authorTooze, RPen
dc.contributor.authorTorrente-Murciano, Len
dc.date.accessioned2017-08-17T12:42:13Z
dc.date.available2017-08-17T12:42:13Z
dc.date.issued2017-04-24en
dc.identifier.issn2046-2069
dc.identifier.urihttps://www.repository.cam.ac.uk/handle/1810/266570
dc.description.abstractThis paper reports for the first time the size control of well-defined and morphologically pure alumina (γ-Al 2 O 3 ) nanorods, presenting an economic and reproducible route for the manufacture of these materials with tuneable sizes for useful applications, for example serving as adsorbents, catalysts and catalyst supports. A detailed understanding of the different steps taking place during the hydrothermal synthesis has been deduced herein. Understanding the effect of temperature on the relative rates of these steps is essential for achieving size and morphology selectivity, but has often been overlooked in the literature. This systematic study identifies six distinct steps taking place during the synthesis: (1) formation of Al(OH) 3 , (2) dissolution of Al(OH) 3 into hexameric based fragments (3) thermolysis at temperatures ≥ 170 °C into soluble AlOOH (boehmite) building blocks (4) formation of lamellar AlOOH sheets (5) scrolling into nanorod crystallites and subsequent oriented attachment into high aspect nanorods and (6) growth by Ostwald ripening to low aspect nanorods. The obtained AlOOH nanorods are converted into γ-Al 2 O 3 with conservation of morphology by calcination at 500 °C. Nanorod formation (step 5) can only be achieved at temperatures ≥ 180 °C (after 20 hours). At 180 °C, growth of the rods (step 6) takes place simultaneously with their slow formation (step 5) leading to two distinct nanorod products with different aspect ratios. At higher temperatures (200 °C), the rate of formation (step 5) is fast, quickly reaching completion, allowing for substantial growth of the nanorods and resulting in a monomodal size distribution. Thus, we have identified that γ-Al 2 O 3 rods with high aspect ratio can be selectively synthesised at 180 °C for ≥20 hours, while low aspect ratios are produced at 200 °C for ≥10 hours. In all cases, the average size of the nanorods increases linearly with prolonged reaction time due to their continuous growth.
dc.description.sponsorshipThe authors would like to acknowledge the UK Engineering and Physical Science Research Council (grant number EP/L020432/ 2) for funding, the Department of Chemical Engineering and Biotechnology at the University of Cambridge and SASOL UK for TEB's studentship.
dc.language.isoenen
dc.publisherRoyal Society of Chemistry
dc.rightsAttribution 4.0 Internationalen
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/en
dc.titleγ-Al2O3 nanorods with tuneable dimensions-a mechanistic understanding of their hydrothermal synthesisen
dc.typeArticle
prism.endingPage22377
prism.issueIdentifier36en
prism.publicationDate2017en
prism.publicationNameRSC Advancesen
prism.startingPage22369
prism.volume7en
dc.identifier.doi10.17863/CAM.10496
dcterms.dateAccepted2017-04-11en
rioxxterms.versionofrecord10.1039/c7ra02590den
rioxxterms.versionVoRen
rioxxterms.licenseref.urihttp://creativecommons.org/licenses/by/4.0/en
rioxxterms.licenseref.startdate2017-04-24en
dc.identifier.eissn2046-2069
rioxxterms.typeJournal Article/Reviewen
pubs.funder-project-idEPSRC (EP/L020432/2)
cam.issuedOnline2017-04-24en
cam.orpheus.successThu Jan 30 12:59:47 GMT 2020 - The item has an open VoR version.*
rioxxterms.freetoread.startdate2100-01-01


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution 4.0 International
Except where otherwise noted, this item's licence is described as Attribution 4.0 International