Show simple item record

dc.contributor.authorKyner, Aen
dc.contributor.authorDharmasena, Ken
dc.contributor.authorWilliams, Ken
dc.contributor.authorDeshpande, Vikramen
dc.contributor.authorWadley, Hen
dc.date.accessioned2018-04-19T11:06:00Z
dc.date.available2018-04-19T11:06:00Z
dc.date.issued2018-07-01en
dc.identifier.issn0734-743X
dc.identifier.urihttps://www.repository.cam.ac.uk/handle/1810/275035
dc.description.abstractThe deformation of square honeycomb core, stainless steel sandwich panels by the impact of explosively accelerated granular matter has been investigated and compared to results from a previous study using equivalent (same material and mass per unit area) solid plates subjected to similar impulsive loadings. Spherical explosive charges surrounded by 25-150 kg mass annular shells of water-saturated granular media (either fused silica or zirconia particles) were suspended above the center of the edge clamped test panels. The radially expanding granular particle front velocities were measured from high-speed video images, and revealed that the granular matter had been accelerated to velocities of 500-1200 m/s after detonation. A Kolsky bar was used to measure the time-dependent pressure and impulse at a position equivalent to the panel center, while the permanent deflections of the sandwich panels were determined by profilometry after the experiments. Even though fracture of electron beam welds used to attach the back face sheet to the sandwich panel core occurred in all the tests, the permanent deflections of the sandwich panel back faces were significantly less than those of equivalent solid plates, and were accompanied by minimal core compression. Discrete particle simulations of the granular matter acceleration and impact loading of the sandwich panels indicated that their superior deflection benefit arose from their high bending resistance rather than particle-structure interactions. This benefit was offset when the rear face of the sandwich was kept the same distance from the impulsive source as that of the solid plate since the impact face of the sandwich panel was closer to the impulsive source, subjecting it to a higher impulse than the solid plate. However, a substantial deflection reduction was still achieved by use of a strong core sandwich design.
dc.publisherElsevier
dc.titleResponse of square honeycomb core sandwich panels to granular matter impacten
dc.typeArticle
prism.endingPage31
prism.publicationDate2018en
prism.publicationNameInternational Journal of Impact Engineeringen
prism.startingPage13
prism.volume117en
dc.identifier.doi10.17863/CAM.22206
dcterms.dateAccepted2018-02-23en
rioxxterms.versionofrecord10.1016/j.ijimpeng.2018.02.009en
rioxxterms.versionAM*
rioxxterms.licenseref.urihttp://www.rioxx.net/licenses/all-rights-reserveden
rioxxterms.licenseref.startdate2018-07-01en
dc.contributor.orcidDeshpande, Vikram [0000-0003-3899-3573]
dc.identifier.eissn1879-3509
rioxxterms.typeJournal Article/Reviewen
rioxxterms.freetoread.startdate2019-02-23


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record