Repository logo
 

Shear response of 3D non-woven carbon fibre reinforced composites

Accepted version
Peer-reviewed

Loading...
Thumbnail Image

Type

Article

Change log

Authors

Abstract

We experimentally and numerically investigated the shear response of a three-dimensional (3D) non-woven carbon fibre reinforced epoxy composite with three sets of orthogonal tows and approximately equal fibre volume fractions in the orthogonal directions. Shear tests on two orientations of dogbone specimens showed significant strain hardening and an increasing unloading stiffnesses with increasing applied strain. Unloading was also accompanied by considerable strain recovery, with X-ray tomographic scans revealing minimal damage accumulation in specimens until near final failure at shear strains in excess of 50%. To understand the origins of this unusual mechanical response of the 3D carbon fibre composites, we developed a micro-mechanical model wherein all tows and matrix pockets in the composite are explicitly considered. The tows were modelled using a pressure-dependent crystal plasticity approach to capture texture evolution under large deformations and the model replicated many of the experimental observations with a high degree of fidelity. Importantly, the model illustrated the role of the 3D architecture in not only suppressing delamination but also enhancing the strain hardening response due to a 3D confinement effect of the tow architecture. On the other hand, a model wherein the tows were modelled using an anisotropic Hill plasticity framework (absent plastic spin) failed to replicate the observed strain hardening response or capture the associated strain recovery upon unloading. This highlights the importance of accounting for the evolution of the material substructure within the tows of these high ductility 3D composites. The results of this work illustrate the unique mechanical behaviour of 3D nonwoven fibre composites and provide insight into how 3D fibre architecture can be used to enhance the mechanical performance of fibre composites.

Description

Keywords

3D CFRP composites, Crystal plasticity, Shear hardening, Texture evolution, Plastic incompatibility

Journal Title

Journal of the Mechanics and Physics of Solids

Conference Name

Journal ISSN

0022-5096
1873-4782

Volume Title

125

Publisher

Elsevier BV
Sponsorship
Office of Naval Research