Show simple item record

dc.contributor.authorJung, Sungmin
dc.contributor.authorChoi, Hyung Woo
dc.contributor.authorMocanu, Felix Cosmin
dc.contributor.authorShin, Dong-Wook
dc.contributor.authorChowdhury, Mohamed Foysol
dc.contributor.authorHan, Soo Deok
dc.contributor.authorSuh, Yo-Han
dc.contributor.authorCho, Yuljae
dc.contributor.authorLee, Hanleem
dc.contributor.authorFan, Xiangbing
dc.contributor.authorBang, Sang Yun
dc.contributor.authorZhan, Shijie
dc.contributor.authorYang, Jiajie
dc.contributor.authorHou, Bo
dc.contributor.authorChun, Young Tea
dc.contributor.authorLee, Sanghyo
dc.contributor.authorOcchipinti, Luigi Giuseppe
dc.contributor.authorKim, Jong Min
dc.date.accessioned2020-01-04T00:34:43Z
dc.date.available2020-01-04T00:34:43Z
dc.date.issued2019-12-30
dc.identifier.issn2045-2322
dc.identifier.urihttps://www.repository.cam.ac.uk/handle/1810/300446
dc.description.abstractA simulation model of electrical percolation through a three-dimensional network of curved CNTs is developed in order to analyze the electromechanical properties of a highly stretchable fiber strain sensor made of a CNT/polymer composite. Rigid-body movement of the curved CNTs within the polymer matrix is described analytically. Random arrangements of CNTs within the composite are generated by a Monte-Carlo simulation method and a union-find algorithm is utilized to investigate the network percolation. Consequently, the strain-induced resistance change curves are obtained in a wide strain range of the composite. In order to compare our model with experimental results, two CNT/polymer composite fibers were fabricated and tested as strain sensors. Their effective CNT volume fractions are estimated by comparing the experimental data with our simulation model. The results confirm that the proposed simulation model reproduces well the experimental data and is useful for predicting and optimizing the electromechanical characteristics of highly stretchable fiber strain sensors based on CNT/polymer composites.
dc.format.mediumElectronic
dc.languageeng
dc.publisherSpringer Science and Business Media LLC
dc.rightsAttribution 4.0 International
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.titleModeling Electrical Percolation to optimize the Electromechanical Properties of CNT/Polymer Composites in Highly Stretchable Fiber Strain Sensors.
dc.typeArticle
prism.issueIdentifier1
prism.publicationDate2019
prism.publicationNameSci Rep
prism.startingPage20376
prism.volume9
dc.identifier.doi10.17863/CAM.47518
dcterms.dateAccepted2019-12-19
rioxxterms.versionofrecord10.1038/s41598-019-56940-8
rioxxterms.versionVoR
rioxxterms.licenseref.urihttp://www.rioxx.net/licenses/all-rights-reserved
rioxxterms.licenseref.startdate2019-12-30
dc.contributor.orcidMocanu, Felix Cosmin [0000-0001-6649-3029]
dc.contributor.orcidChowdhury, Mohamed Foysol [0000-0002-0095-0546]
dc.contributor.orcidOcchipinti, Luigi Giuseppe [0000-0002-9067-2534]
dc.identifier.eissn2045-2322
rioxxterms.typeJournal Article/Review
pubs.funder-project-idEuropean Commission Horizon 2020 (H2020) Research Infrastructures (RI) (685758)
pubs.funder-project-idEngineering and Physical Sciences Research Council (EP/P027628/1)
cam.issuedOnline2019-12-30


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution 4.0 International
Except where otherwise noted, this item's licence is described as Attribution 4.0 International