A simple, reliable and robust reinforcement method for the fabrication of (RE)-Ba-Cu-O bulk superconductors
Superconductor Science and Technology
Institute of Physics Publishing
MetadataShow full item record
Namburi, D., Huang, D., Lau, W., Shi, Y., Palmer, K., Dennis, T., Cardwell, D., & et al. (2020). A simple, reliable and robust reinforcement method for the fabrication of (RE)-Ba-Cu-O bulk superconductors. Superconductor Science and Technology, 33 (5)https://doi.org/10.1088/1361-6668/ab7ec4
Bulk high temperature superconductors (HTS) based on the rare-earth barium cuprates [(RE)BCO] have the potential to be applied in a variety of engineering and technological applications such as trapped field magnets, rotating electrical machines, magnetic bearings and flywheel energy storage systems. The key materials figure of merit for most practical applications of bulk superconductors is simply the product of the maximum current density that can be supported, which correlates directly with the maximum achievable trapped magnetic field, and the physical length scale over which the current flows. Unfortunately, however, bulk (RE)BCO superconductors exhibit relatively poor mechanical properties due to their inherent ceramic nature. Consequently, the performance of these materials as trapped field magnets is limited significantly by their tensile strength, rather than critical current and size, given that the relatively large Lorentz forces produced in the generation of large magnetic fields can lead to catastrophic mechanical failure. In the present work, we describe a simple, but effective and reliable reinforcement methodology to enhance the mechanical properties of (RE)BCO bulk superconductors by incorporating hybrid SiC fibres consisting of a tungsten core with SiC cladding within the bulk microstructure. An improvement in tensile strength by up to 40% has been achieved via this process and, significantly, without compromising the superconducting performance of the bulk material.
The authors acknowledge funding by the Engineering and Physical Sciences Research Council (EPSRC) with grant code EP/P00962X/1. Additional data related to this publication is available at https://doi.org/10.17863/CAM.47211 in the University of Cambridge data repository. All other data accompanying this publication are available directly within the publication.
External DOI: https://doi.org/10.1088/1361-6668/ab7ec4
This record's URL: https://www.repository.cam.ac.uk/handle/1810/303278
All rights reserved