Supporting data for: "The 3D Printing of  Freestanding PLLA Thin Layers and Improving First Layer Consistency through the Introduction of Sacrificial PVA"

Name: Supporting data for: "The 3D Printing of Freestanding PLLA Thin Layers and Improving First Layer Consistency through the Introduction of Sacrificial PVA"
Published: 2021-08-06T14:31:13Z
Keywords: 3D printing, PLLA, FDM, PVA, Layer separation, thin films, thin layers

Roper, David; Kwon, Kyung Ah; Best, Serena; Cameron, Ruth

Supporting data for: "The 3D Printing of Freestanding PLLA Thin Layers and Improving First Layer Consistency through the Introduction of Sacrificial PVA"

Repository URI

https://www.repository.cam.ac.uk/handle/1810/326408

Repository DOI

https://doi.org/10.17863/CAM.64902

Files

figure1(PLLAvsLayerSep).csv (1.43 KB)

figures5and7(PVAvsLayerSep).csv (8.33 KB)

figure8(PVAandPLLA_layersep).csv (3.19 KB)

Type

Dataset

Authors

Roper, David

Kwon, Kyung Ah

Best, Serena

https://orcid.org/0000-0001-7866-8607

Cameron, Ruth

https://orcid.org/0000-0003-1573-4923

Description

The dataset contains measurements of thicknesses of printed layers of PVA and PLLA used to produce a series of figures for the associated publication. The analysis was motivated by improving the consistency of the first layers deposited in fused deposition modelling 3D prints, and to provide a means to produce thin (~25 microns thick) free-standing layers of PLLA.

Software / Usage instructions

Data is tabulated as csv files named to coordinate with relevant figures.

Keywords

3D printing, PLLA, FDM, PVA, Layer separation, thin films, thin layers

Rights

Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)

Sponsorship

EPSRC (1942009)

Relationships

Supplements:

https://www.repository.cam.ac.uk/handle/1810/325503

https://doi.org/10.3390/app11146320

Collections

Research Data - Materials Science and Metallurgy