Research data supporting "An Experimental Investigation into the Dimensional Quality of the Material Extrusion Additive Manufacturing Process" (C.1)
Repository URI
Repository DOI
Change log
Authors
Description
High speed camera video recording (.mp4 file) showing single strand deposition. The video was filmed with a Chronos 1.4 high-speed camera from Kron Technologies which was positioned at a 30 mm focal distance from the subject. The optical axis was carefully positioned parallel to the nozzle. An aspect ratio of 1280 x 1024, frame rate of 1069 FPS, with an exposure time of 545 μs were used.
The video recording shows single strand deposition in the negative Y direction using the Creality machine. The extrusion parameters are shown below.
ABS material, nozzle gap height 0.12 mm, print head velocity 20 mm/s, extruder temperature 240 deg.
Version
Software / Usage instructions
The video was recorded using the Chronos 1.4 high speed camera. The video was saved on the camera's SD card and subsequently exported as a .mp4 file. It was then edited using Windows FilmForth – Video Editor & Movie Maker.
Publisher
Rights and licensing
Except where otherwised noted, this item's license is described as Attribution 4.0 International (CC BY 4.0)
Sponsorship
EPSRC (2116632)