Repository logo
 

Kinetic and Thermodynamic Enhancement of Low-Temperature Oxygen Release from Strontium Ferrite Perovskites Modified with Ag and CeO2.

Published version

Published version
Peer-reviewed

Repository DOI


Change log

Authors

Harrison, Alexander RP 
Kwong, Kien Y 
Zheng, Yaoyao 
Balkrishna, Abhishek 
Dyson, Alice 

Abstract

The redox behavior of the nonstoichiometric perovskite oxide SrFeO3-δ modified with Ag, CeO2, and Ce was assessed for chemical looping air separation (CLAS) via thermogravimetric analysis and by cyclic release and uptake of O2 in a packed bed reactor. The results demonstrated that the addition of ∼15 wt % Ag at the surface of SrFeO3-δ lowers the temperature of oxygen release in N2 by ∼60 °C (i.e., from 370 °C for bare SrFeO3-δ to 310 °C) and more than triples the amount of oxygen released per CLAS cycle at 500 °C. Impregnation of SrFeO3-δ with Ag increased the concentration of oxygen vacancies at equilibrium, lowering (3 - δ) under all investigated oxygen partial pressures. The addition of CeO2 at the surface or into the bulk of SrFeO3-δ resulted in more modest changes, with a decrease in temperature for O2 release of 20-25 °C as compared to SrFeO3-δ and a moderate increase in oxygen yield per reduction cycle. The apparent kinetic parameters for reduction of SrFeO3-δ, with Ag and CeO2 additives, were determined from the CLAS experiments in a packed bed reactor, giving activation energies and pre-exponential factors of Ea,reduction = 66.3 kJ mol-1 and Areduction = 152 mol s-1 m-3 Pa-1 for SrFeO3-δ impregnated with 10.7 wt % CeO2, 75.7 kJ mol-1 and 623 molO2 s-1 m -3 Pa-1 for SrFeO3-δ mixed with 2.5 wt % CeO2 in the bulk, 29.9 kJ mol-1 and 0.88 molO2 s-1 m-3 Pa-1 for Sr0.95Ce0.05FeO3-δ, and 69.0 kJ mol-1 and 278 molO2 s-1 m-3 Pa-1 for SrFeO3-δ impregnated with 12.7 wt % Ag, respectively. Kinetics for reoxidation were much faster and were assessed for two materials with the slowest oxygen uptake, SrFeO3-δ, giving the activation energy Ea,oxidation = 177.1 kJ mol-1 and pre-exponential factor Aoxidation = 3.40 × 1010 molO2 s-1 m-3 Pa-1, and Sr0.95Ce0.05FeO3-δ, giving the activation energy Ea,oxidation = 64.0 kJ mol-1, and pre-exponential factor Aoxidation = 584 molO2 s-1 m-3 Pa-1.

Description

Keywords

4004 Chemical Engineering, 40 Engineering, 4019 Resources Engineering and Extractive Metallurgy, 7 Affordable and Clean Energy

Journal Title

Energy Fuels

Conference Name

Journal ISSN

0887-0624
1520-5029

Volume Title

37

Publisher

American Chemical Society (ACS)
Sponsorship
EPSRC (EP/V048414/1)
EPSRC (EP/W027860/1)
EPSRC (2376181)
Relationships
Is supplemented by: