Miniaturisation of pH Holographic Sensors for Nano-Bioreactors
Lowe, Christopher R
University of Cambridge
Department of Chemical Engineering and Biotechnology
Doctor of Philosophy (PhD)
MetadataShow full item record
Chan, L. C. Z. (2017). Miniaturisation of pH Holographic Sensors for Nano-Bioreactors (Doctoral thesis). https://doi.org/10.17863/CAM.14368
Monitoring and controlling pH is of utmost importance in bioprocessing as it directly affects product yield and quality. Multiplexed experiments can be performed in nanobioreactors for optimisation of yield and cell heterogeneity in a relatively quick and inexpensive manner. In this thesis, a pH holographic sensor (holosensor) is miniaturised to 3.11 nL in volume and integrated into a PDMS-glass microfluidic chip for monitoring the growth of Lactobacillus casei Shirota. Although other established methods for monitoring cell cultures can be utilised, miniaturised holosensors enable real-time and non-consumptive monitoring of the bacterial cell culture growth medium. The 2-hydroxyethylmethacrylate (HEMA)-co-2-(trifluoromethyl) propenoic acid (TFMPA) holosensor was fabricated using an adapted technique from photolithography, coupled with the use of a polymerisation inhibitor to control the gel polymerisation with diameters not exceeding a standard deviation of 0.067. The hologram brightness was optimised to 1.05 ms integration time with 36X magnification using a low power (0.290 mW) 532 nm green continuous wave (CW) laser with a devised beam-offset technique. The holosensor was characterised with ionic strength balanced (9.50 mS/cm) McIIvaine pH buffers and a calibration curve plotted together with measured ionic strength, optical density at 600 nm (OD600) and pH. Correspondingly, RGB-xyY transformed values were plotted in the CIE 1931 chromaticity diagram. Later, a miniaturised 0.4$\phi$ HEMA-co-TFMPA holosensor and array was also demonstrated. Together with the 3.0$\phi$ holosensor, an accuracy parameter for the 0.4$\phi$ spot and array holosensors were calculated to be 99.08%, 99.38% and 97.77% respectively. Further work involved studying the issues associated with fabricating gels with unusually flat gel profiles. Other preliminary results suggested the alternative of utilising polymers as a holosensor substrate, together with a dye-free method for hologram fabrication, outlined the prospective possibility of a miniaturised holosensor integrated into a polymer microfluidic chip with the flexibility of hologram colour customisation for cell culture monitoring.
Holographic sensor, biosensor, pH monitoring, microfluidic chip, bacterial growth, microbioreactor
Sponsored by Agency for Science, Technology and Research (A*STAR)
This record's DOI: https://doi.org/10.17863/CAM.14368
No Creative Commons licence (All rights reserved), All Rights Reserved, Permission was granted for figures utilised in this thesis and acknowledgement was provided in the figure captions as stipulated by the figures copyright owners.
Licence URL: https://www.rioxx.net/licenses/all-rights-reserved/