Show simple item record

dc.contributor.authorHorne, John Gregory
dc.date.accessioned2018-09-11T15:09:15Z
dc.date.available2018-09-11T15:09:15Z
dc.date.issued1978-11-14
dc.identifier.otherPhD.10721
dc.identifier.urihttps://www.repository.cam.ac.uk/handle/1810/280135
dc.description.abstractThe main aim of the work described in this dissertation has been to develop a description of the interface between the chip and the rake face of a cutting tool. This interface is of great importance in many manufacturing operations. The experiments are conducted in a vacuum planing machine, which provides precise control of the atmospheric conditions during cutting. The chip/tool interface is studied directly, using a transparent (sapphire) cutting tool to machine various ductile metals, such as lead and aluminium, in air and in vacuum. On the basis of these observations a new classification is made of the zones of contact at the interface in continuous cutting. This description is extended to steel tools and harder workpieces such as copper. The influence of oxygen on the rake face interaction is investigated. Previous workers have noted apparently anomalous behaviour; it is suggested that recent discoveries about the adhesion between metals and oxides help to explain these anomalies. The transparent tool is used to study the access of cutting lubricants to the chip/tool interface and the role of lubricants is examined in the light of the new description of the interface. Continuous cutting with built-up edge formation, experienced with materials such as Duralumin and steel, and discontinuous cutting, experienced with materials such as magnesium and free-machining brass, are studied by means of these new techniques. Some suggestions are made concerning the material properties responsible for these types of cutting behaviour. The conditions of contact at the rake face of the tool are also studied. A study is made of the influence of crystallografhic orientation of the workpiece on the cutting process. Pure single crystals of aluminium, copper and magnesium are machined in various orientations. Some speculations are also made about the source of the instability in continuous cutting and on the mechanism of chip curl.
dc.description.sponsorshipDigitisation of this thesis was sponsored by Arcadia Fund, a charitable fund of Lisbet Rausing and Peter Baldwin.
dc.rightsAll Rights Reserveden
dc.rights.urihttps://www.rioxx.net/licenses/all-rights-reserved/en
dc.titleThe chip-tool interface in metal cutting
dc.typeThesis
dc.type.qualificationlevelDoctoral
dc.type.qualificationnameDoctor of Philosophy (PhD)
dc.publisher.institutionUniversity of Cambridge
dc.publisher.departmentDepartment of Physics
dc.identifier.doi10.17863/CAM.27501


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record