Production of hydrogen and carbon nanotubes from methane using a multi-pass floating catalyst chemical vapour deposition reactor with process gas recycling.
Published version
Peer-reviewed
Repository URI
Repository DOI
Type
Change log
Abstract
Converting natural gas into hydrogen and solid carbon materials using methane pyrolysis presents a promising opportunity to produce sustainable fuels and materials. The production of hydrogen and bulk carbon nanotubes (CNTs) via methane pyrolysis has been demonstrated independently, but concurrent production from the same reactor has remained elusive. Here we present a multi-pass floating catalyst chemical vapour deposition (FCCVD) reactor that converts methane into hydrogen and CNT aerogel. Whereas previous FCCVD CNT production consumed hydrogen, the multi-pass reactor recycles the carrier gas to eliminate the need for a hydrogen input. This results in a net output of 85 vol% hydrogen alongside CNT aerogel and a 446-fold increase in molar process efficiency. Furthermore, the demonstrated use of biogas to produce CNT aerogel enables a potential net sequestration of CO2 from the atmosphere. The results of this study have been extrapolated to a pilot-scale reactor, using data gathered at a commercial facility, to consider the challenges and opportunities associated with scale-up.
Description
Acknowledgements: We acknowledge the support of UKRI-EPSRC under grant reference EP/Y026098/1, under the Building a Green Future theme, and the International Science Partnerships Fund as part of the Global Hydrogen Production Technologies (HyPT) Center, along with the Carbon Hub and the Kavli Foundation Exploration Award in Nanoscience for Sustainability LS-2023-GR-51-2857. In addition, J.P. thanks the Harding Distinguished Postgraduate Scholars Programme for funding his PhD. We thank Tortech Nanofibres for allowing us to measure their process, and Q-Flo Limited for lending equipment and expertise in these experiments. We thank F. Freebairn at Machworks Precision Engineering for designing and manufacturing the collection chamber that enabled the continuous collection of CNT mats and recycling of the process gases in this reactor. We thank L. Arnold, B. Coles and the rest of the technical staff at the Cambridge University Department of Engineering, who were integral in keeping these experiments running smoothly. The Talos TEM microscope used in this study was funded through the EPSRC Underpinning Multi-User Equipment Call (EP/P030467/1) and was expertly operated by H. Greer.
Funder: RCUK | Engineering and Physical Sciences Research Council (EPSRC); doi: https://doi.org/10.13039/501100000266; Grant(s): EP/Y026098/1, UKRI:10043701, UKRI:10043701, EP/M015211/1, UKRI:10043701, EP/Y026098/1, EP/M015211/1
Journal Title
Conference Name
Journal ISSN
2058-7546
Volume Title
Publisher
Publisher DOI
Rights and licensing
Sponsorship
Engineering and Physical Sciences Research Council (EP/P030467/1)

